ULTRAMAG SPECIFICATION

ULTRAMAG is destined for the commercial and the industrial market. The complex is produced with dynamic range of measurement 1:160 and rate values from G10 to G250. ULTRAMAG competes with membrane gas meters G25…G65. Ultrasonic complexes ULTRAMAG have compact pipe runs. The connection to the pipeline is performed by thread connection for diameters of 40, 50, 80 mm, as well as flanges with nominal inside diameter of 80 and 100 mm.

ULTRAMAG – PROVIDING YOU WITH THE PERFECT GAS FLOW METER FOR ANY APPLICATION

PRODUCT DESCRIPTIONULTRAMAG – is a ultrasonic gas flow meter complex based on ultrasonic technologies for measuring of gas flow and volume rate with the possibility of temperature, pressure and gas compressibility factor correction.

PRODUCT DESCRIPTIONULTRAMAG – is a ultrasonic gas flow meter complex based on ultrasonic technologies for measuring of gas flow and volume rate with the possibility of temperature, pressure and gas compressibility factor correction.

Function:ULTRAMAG is destined for the commercial and the industrial market. The complex is produced with dynamic range of measurement 1:160 and rate values from G10 to G250. ULTRAMAG competes with membrane gas meters G25…G65. Ultrasonic complexes ULTRAMAG have compact pipe runs. The connection to the pipeline is performed by thread connection for diameters of 40, 50, 80 mm, as well as flanges with nominal inside diameter of 80 and 100 mm.

Application:Complexes can be used in gas-distribution plants, gas distribution points, boiler and industrial plants and other gas metering stations with inlet pressure up to 1.6 МPа. ULTRAMAG can be used for measurement of natural gas, biogas and LPG in a steam state.

Advantages• Placing ………………………………………………………… any position;• Wide measuring range of pressure channel ……….. 1:11;• Wide flowrate range Qmin/Qmax …………………….. 1:160;• Simultaneous operation of three interfaces ……….. RS-232, RS-485, optoport;• Calibration interval ………………………………………… 6 years;• Autonomous power supply up to ………………………. 6 years;• Supply with ………………………………………………….absolute pressure or over pressure transducer• Deep archive of records about ……………………….. 2000 months;• Temperature range ………………………………………. from –40°C up +60°C;• Operation with pressures from ………………………. 0 up to 1.6 МPa;• Explosion protection …………………………………….. 1ExibIIСT4 Х                                                                                  • Dust-and-moisture protection …………………………….. IP 65

GAS VOLUME CORRECTOR FLOWGAS

The block of volume correction gas FLOWGAS is designed for reduction of working volume of the gas passing through the counter of gas, to standard conditions (plus of 20°C and 101325 Pa). Application area — commercial and technology metering of gas on gas distribution stations and gas distributing points of the industrial enterprises and facilities of utility.

Advantages:

• High metrological stability;

• Measured pressure range 1:10;

• Work at pressure up to 10,0 MPa;

• Pressure losses measurement at the meter;

• Environment temperature measurement;

• Simultaneous operation of two RS-232 and RS-485 interfaces;

• Optical port and 6-button keypad.

Description:

The operation principle of the block is based on measurement of the current values of pressure, temperature, gas volume under operating conditions and calculations according to information received taking into account component composition of gas volume and the gas flow rate to reduced to standard conditions.

For specification and view more details download pdf here